Web Pages Containing General Information

 PDF Documents Regarding General Topics

• G0001E General Guide to ICP^® Instrumentation.
• Incoming Inspection Guide for ICP^® sensors.
• A Smart Sensor Signal Conditioner for Monitoring and Analyzing Dynamic Signals.
• NDT Resonant Acoustic Method Technique for On-Line Defect Detection During Metal Parts Production.

 PDF Documents Regarding Vibration, Shock, and Acceleration Measurements

• Accelerometer transverse sensitivity measurement using planar orbital motion
• Accelerometer shock sensitivity calibration using a pneumatic exciter
• Diagnosing Vibration Problems with Embedded Sensitivity Functions - Sound and Vibration/April 2003.
• Streamlined Test Setup with TEDS Technology
• TN-17 Accelerometer Selection Considerations: Charge and ICP^® Integrated Circuit Piezoelectric.
• TN-11 Calculating Rise Time Capabilities for Shock and Blast Measurements.
• TN-16 Technical note addresses the use of Placebo Transducers.
• TN-19 The Shock Spectrum: What Is It?
• TN-23 Pyroshock Explained.
• TN-24 Selecting Accelerometers for and Assessing Data from Mechanical Shock Measurements.
• TN-25 How High in Frequency Are Accelerometer Measurements Meaningful.
• TN-26 Why is MEMS the Preferred Technology for High Shock Measurement?

 PDF Documents Regarding Industrial Vibration Monitoring

• TN-14 White paper discusses the technology behind the Patented Model 682A05 Bearing Fault Detector.

 PDF Documents Regarding Acoustic Measurements

• Source Identification Using Acoustic Array Techniques. From the Proceedings of the SAE Noise and Vibration Conference, Vol 2, pp 1023-1035, Traverse City, MI, May 1995.

 PDF Documents Regarding Pressure Measurements

• TN-12 Technical note addresses Air Blast Measurements (Part 1).
• TN-13 Technical note addresses Air Blast Measurements (Part 2).
• TN-18 Technical note addresses Air Blast Measurements (Part 3).
• TN-21 Technical note addresses Air Blast Measurements (Part 4).
• TN-22 Technical note addresses Air Blast Measurements (Part 5).
• TN-15 Technical note addresses Dynamic Pressure Calibration.
• TN-11 Calculating Rise Time Capabilities for Shock and Blast Measurements.
• TN-27 Measuring Static Overpressures in Air Blast Environments
• TN-28 Measuring Underwater Explosions: Transducers and Their Application

 PDF Documents Regarding Force and Load Measurements

• TN-9 Technical note addresses Shunt Calibration technique for strain gage load cells.

 PDF Documents Regarding Torque Measurements

• TN-10 Technical note addresses Extraneous Load Limits for TORKDISC^® rotary torque sensors.